CRST 600 stage 3 is a calibration bench for BOSCH CRI 1.0 2.0, 2.1 2.2 CRIN and some DENSO type injectors.
You can calibrate 4 injector under 30 minute as fabrication standart.
These injectors need at 5 points adjustments with digital gauges.
- Magnet shim
- Air gap shim under magnet.
- Pilot adjustment from ball lift.
- Opening pressure or Idle speed adjustment.
- Needle lift adjustment.
Computer aided program includes illustraded instructions to continue step by step.
You can check and compare the current rising time (CRT) and Mili henry values between good injectors and solve the hard problems which test bench can not shows .
With digital microscobe you can see the problematic part inside of the injector before adjustment.
Insulation meter shows you the status of the coil between body.
With serial number those following data’s come automaticly;
- Vehicle data
- 4 adjustment values·
- 3 most important spare parts numbers·
- 3 torq value pilot, magnet and nozzle holder.
There are 2 groups and over 500 different serials in database, so each group offers perfect calibration for injectors
Software updates and test plans can be loaded with remote desktop free of charge. Please check the inculed accesories and tools from the below tab