CRST 600
CRST 600 stage 3 is a calibration bench for BOSCH CRI 1.0 2.0, 2.1 2.2 CRIN and some DENSO type injectors.
You can calibrate 4 injector under 30 minute as fabrication standart.
These injectors need at 5 points adjustments with digital gauges.
- Magnet shim
- Air gap shim under magnet.
- Pilot adjustment from ball lift.
- Opening pressure or Idle speed adjustment.
- Needle lift adjustment.
Fill the Form, Get a Price List!
CRST 600
Computer aided program includes illustraded instructions to continue step by step.
You can check and compare the current rising time (CRT) and Mili henry values between good injectors and solve the hard problems which test bench can not shows .
With digital microscobe you can see the problematic part inside of the injector before adjustment.
Insulation meter shows you the status of the coil between body.
With serial number those following data’s come automaticly;
- Vehicle data
- 4 adjustment values·
- 3 most important spare parts numbers·
- 3 torq value pilot, magnet and nozzle holder.
There are 2 groups and over 500 different serials in database, so each group offers perfect calibration for injectors
Software updates and test plans can be loaded with remote desktop free of charge. Please check the inculed accesories and tools from the below tab
| Supply Voltage | 220 V AC |
| Dimensions (L x H x W) | 18x19x52 cm |
| Weight | 180 kg (net) |
| Air supply requirement | 2 bar |
| Power Output (duration) | 750 Watt |
| Code | Description | Pieces |
| 4.02.16.192 | Working table 1.8m (with lightning) | 1 pcs |
| 4.02.05.001 | 125 mm universal clamper | 1 pcs |
| 4.12.02.158 | Computer | 1 pcs |
| 4.12.02.155 | 23.6 inc led monıtor | 1 pcs |
| 4.02.12.191 | Keyboard and mause set (wireless) | 1 pcs |
| 4.02.05.008 | Digital mıcroscobe | 1 pcs |
| 3.02.15.159 | Dıgıtal microscobe stand | 1 pcs |
| 1.01.01.031 | Ahe stage 3 mechanıcal stand | 1 pcs |
| 4.02.05.086 | Injector holder block | 1 pcs |
| Dıgıtal micrometer | 1 pcs | |
| 4.02.05.089 | Digital micrometer stand | 1 pcs |
| 4.01.15.006 | Ahe measurement needle for bosch | 1 pcs |
| 4.01.15.031 | Ahe measurement needle for denso | 1 pcs |
| 4.01.13.151 | Ahe measurement sleeve for denso inj | 1 pcs |
| 4.01.15.024 | Ahe measurement sleeve for bosch pkw | 1 pcs |
| 4.01.15.025 | Ahe measurement sleeve for bosch lkw | 1 pcs |
| 4.02.05.037 | Ahe measurement digıtal dıal gauge 0.001 mm | 1 pcs |
| 1.01.01.044 | Coıl aırgap measurement tool and dial gauge 0,01mm | 1 pcs |
| 1.01.01.045 | Body aırgap measurement tool and dıal gauge 0,01mm | 1 pcs |
| 1.01.01.046 | Tablet measurement tool and dıal gauge 0,01mm | 1 pcs |
| 1.01.01.047 | Coıl sprıng measuremen tool and dıal gauge 0,01mm | 1 pcs |
| 1.01.01.048 | Ahe manuel measurement tool and dıal gauge 0,01mm | 1 pcs |
| 1.01.01.049 | Idle shım measurement tool and dıal gauge 0,01mm | 1 pcs |
| 4.02.05.014 | Torqmeter analog 20-50 Nm | 1 pcs |
| 1.02.01.053 | Cr bosch valve dısasmble tool | 1 pcs |
| 1.01.05.067 | Impact deep socket nr 29 | 1 pcs |
| 1.01.05.068 | Impact deep socket nr 30 | 1 pcs |
| 4.02.13.094 | Specıal wrench tool nr 27/28 | 1 pcs |
| 1.01.05.025 | Dısassamble tool for nozzle holder 18×8 | 1 pcs |
| 4.02.13.149 | Impact deep socket nr 14 | 1 pcs |
| 4.02.13.150 | Impact deep socket nr 15 | 1 pcs |
| 4.02.13.147 | Torx bit socket m10 | 1 pcs |
| 4.02.13.148 | Torx bit socket m12 | 1 pcs |
| 4.02.05.057 | Inj. Dissamble clamper for Bosch Types | 1 pcs |
| 1.01.05.043 | Inj. Dissamble set for denso Injectors | 1 pcs |
| 4.02.05.085 | Dıgıtal insulation resıstance tester | 1 pcs |
| 4.02.05.191 | Injector seal ring installation tool | 1 pcs |
| 4.02.05.028 | Injector valve disasmble tool | 1 pcs |
| 1.02.13.002 | Shim set 500 pieces | 6 set |
| 1.01.01.079 | Crst 500 pulse simulator | 1 pcs |
| 1.01.11.008 | Denso 1 type inj cable | 1 pcs |
| 1.01.11.009 | Universal inj cable | 1 pcs |
| 1.01.11.004 | Lkw type inj. Cable | 1 pcs |
| 1.01.11.005 | Bosch pkw type inj. Cable | 1 pcs |
| 4.02.16.011 | Hanger twin 55 mm | 7 pcs |
| 4.02.16.012 | Hanger mono 55 mm | 8 pcs |
| 4.02.12.148 | Installation USB Flash disk | 1 pcs |
SOME INJECTORS AND PUMPS REQUIRED EXTRA EQUIPMENTS AND ACCESSORIES. PLEASE CONTACT US ABOUT YOUR TYPES
Best Diesel Test Machines For Your Diesel Center
We have advanced diesel test bench manufacturing system. You could get a service about common rail injection system, UNIT injection & pump system, auxiliary equipments, DPF cleaner products and tools accessories.
We love our customers and always product support them. If you would like to see our happy clients on diesel injection business, click on it.
Codeman Express CRST600 and DYL811 MEC CAM Benches
Congratulations to our valued customer in Taras! We are pleased to announce the successful installation
Thank you DPF Cleantech Frankfurt
Big news from Frankfurt!We’ve just delivered our Codeman QUATTRO and CRST 600 to our valued
Özgür Dizel has a Codeman Twin Diesel Injector Test Bench
Another success story!We are proud to deliver our Codeman TWIN to Özgür Dizel. Thank you
Codeman Express CRST600 and DYL811 MEC CAM Benches
Congratulations to our valued customer in Taras! We are pleased to announce the successful installation
Thank you DPF Cleantech Frankfurt
Big news from Frankfurt!We’ve just delivered our Codeman QUATTRO and CRST 600 to our valued
Özgür Dizel has a Codeman Twin Diesel Injector Test Bench
Another success story!We are proud to deliver our Codeman TWIN to Özgür Dizel. Thank you
Dayel Diesel Afrika’da Güçleniyor
Dayel Diesel Afrika’da Güçleniyor! 🚀 Burkina Faso’daki değerli iş ortağımız Jeunesse Diesel için bir ilki
Codeman Express Arrives in Bilecik Gür Pompa!
Our valued customer Gür Pompa in Bilecik has upgraded their workshop with the Codeman Express,