Codeman PLUS+ Premium, Exact and fast CR injector and pump TESTING & CODING
Performing complete and accurate test of multi-brand CR injectors and Pumps
4 Cylinder CR injector testing
Bosch, Delphi, Denso, Siemens VDO, CAT, Scania
4 injector coding at the same time
- Bosch Selenoid IMA
- Bosch Piezo ISA
- Delphi C2i/C3i
- Siemens IIC Coding
- Denso QR Coding
- Bosch CP1-CP3-CP4
- Denso HP3
**Please check the OPTIONAL tab below to see additional auxiliary tools for other models
Codeman Plus+ has reduced setup and test times as well as user friendly operation menu.
Sensitive flowmeters has capable to test injectors under 10 minutes in manual mode (4 flowmeters for 4 cylinders)
Operation via 15,6″ touch screen monitor
Full automatic mode testing provides certain and fast results.
Ergonomic design , wide range injector fixtured area ,
Easy setup with 90 degree fittings and 2500 bar Flexi pipes.
With loaded CR pump test plans you can test;
- Efficienycy of flow
- DRV or mprobe amperes and reaction
- Internal pressure
- Maximum pressure
- Start pressure and plunger status
There are 7 groups and over 3800 different test values in database, so each group offers perfect coding and testing for injectors.
Software updates and test plans can be loaded with remote desktop free of charge.
In coding section there are ready targets for most injectors and coding section can be used freely first 400 days.
|Supply voltage||AC 380 (3P+N+GND)|
|Motor Power||15 Hp|
|High pressure pump pressure||0-2200 Bar|
|Low Pressure||0,5 – 6 bar|
|RPM||0-4000 rpm adjustable|
|Flow Sensor Filter||20uM|
|Inj Flow Sensor Range||0.1 – 500 cc /min|
|Pump Flow Sensor Range||1-300 L/h|
|Dimensions (L x H x W)||1350x1600x750 mm|
|Oil Tank Capacity/Type||20 lt (ISO 4113)|
|Power Output (duration)||8 Kw|