Unit S PC Cambox
Unit S PC Cambox has designed to injector spraying testing.
Performing complete and accurate test of multi-brand injectors and Pumps
New CAMBOX designed with 5 section original cam;
- 1.cam VW
2.cam Cummins
3.cam Volvo-Iveco-Scania,
4.cam MB Axor,Atego
5.cam MB Actross,DAF, Mack, Renault
Test plans consist of 5 groups
- Bosch PKW (VW-AUDI-SEAT-SKODA)
- Bosch LKW (MB,DAF,IVECO.SCANIA…)
- Delphi Volvo group (FH 12, 2 pin,4 pin)
- Cummins & CAT & Detroit USA group
- Siemens piezo (BKP)
**Please check the OPTIONAL tab below to see additional auxiliary tools for other models.
UNIT S PC CAMBOX - Unit Injector Test Bench
With fast assambly and easy adjustment also user friendly program enables tests and determinations to be achieved very quickly
Actuator valve measurement via BIP sensor and delay time(response time) measurements with follow oscillascope.
Easy and oil free change of cam with a special designed sliding plate.
Perfect angle reseting with 360 pulse encoder for each cam shafts.
Dynamic electronic mass measurement for quatitiy.(OPTIONAL)
Trolley of the machine helps you slide the cambox to your own bench.
You can check the unit injectors such as Cummins, Caterpillar, Detroit, Delphi Euro 6 and injection system of Scania HPI (optional)
It contains test plans of most injector and pump types in the market.
Software updates and test plans can be loaded with remote desktop free of charge.
10 pieces adaptors is given free with the bench
** A traditional test bench must be used with this Simulator and cambox (min 7.5 kW)
| Supply voltage | AC 220 V |
| Min Required Motor Power | 11 Hp |
| Required Low Pressure Pressure | 1 – 8 bar |
| Required RPM of AC motor | 0-2000 rpm adjustable |
| Dimensions (L x H x W) | 1200x1550x500 mm |
| Weight | 180 Kg |
| Code | Description | Pieces |
| CAMBOX 125 (5 CAM) | 1 pcs | |
| 3.02.15.048 | Cam shaft pusher 1st cam | 1 pcs |
| 3.02.15.050 | Cam shaft pusher 2nd cam | 1 pcs |
| 3.02.15.051 | Cam shaft pusher 3th cam | 1 pcs |
| 3.02.15.052 | Cam shaft pusher 4th cam | 1 pcs |
| 3.02.15.053 | Cam shaft pusher 5th cam | 1 pcs |
| 1.02.02.033 | Bosch VW PDE 1 Type Inj. Test Adaptor | 1 pcs |
| 1.02.02.031 | Siemens&Bosch VW PDE2 Type Inj. Test Adaptor | 1 pcs |
| 1.02.02.018 | Delphi EUI E1/E3 Inj. Test Adaptor | 1 pcs |
| 1.02.02.029 | Bosch EUI Scania Type Inj Test Adaptor | 1 pcs |
| 1.02.02.017 | Bosch EUI Iveco 8-10 Type Inj Test Adaptor | 1 pcs |
| 1.02.02.018 | Bosch EUP Actross Type Pump Test Adaptor | 1 pcs |
| 1.02.02.019 | Bosch EUP Axor/Atego Type Pump Test Adaptor | 1 pcs |
| 1.02.02.025 | Cummins Celectt EUI Type Inj Test Adaptor | 1 pcs |
| 1.02.02.026 | Bosch/Delphi EUP Daf Pump Test Adaptor | 1 pcs |
| 1.02.02.017 | Bosch/DelphiEUI Iveco/Volvo Type Inj Test Adaptor | 1 pcs |
| 1.01.11.020 | Selenoid Inj&pump Main Test Cable | 1 pcs |
| 1.01.11.021 | Piezo Inj Main Test Cable | 1pcs |
| 1.01.11.009 | Delphi 2 Pin Inj Test Cable | 1 pcs |
| 1.01.11.010 | Delphi 4 Pin Inj Test Cable | 1 pcs |
| 1.01.11.022 | Bosch EUI PKW Inj. Test Cable | 1 pcs |
| 1.01.11.023 | Bosch EUP LKW pump test cable | 1 pcs |
| 1.01.11.004 | LKW Type Inj. Cable | 1 pcs |
| 1.01.11.009 | Universal Inj Test Cable | 1 pcs |
| Inj – Pump Connection Screw Set (12 pcs) | 1 set | |
| Injector and Pump Spacer Set (6 pcs) | 1 set | |
| 4.02.05.026 | Test Injector for LKW Pumps | 1 pcs |
| 3.02.15.054 | Dummy Fixture for calibration | 1 pcs |
| 4.02.16.141 | Hanger Mono 85 mm | 10 pcs |
| 4.02.16.089 | Inlet and Outlet hoses | 1 Set |
| 4.02.13.027 | Pipe 6×2 mm 600 mm 14X14 | 1 pcs |
| 1.02.05.026 | Trolley 100 cm | 1 pcs |
| 3.02.13.079 | 14 mm T type screw and 14 mm nut | 2 set |
| 4.02.11.152 | 220 VOLT Power Cable 3 Meter | 1 pcs |
| 4.02.12.148 | Installation USB Flash disk | 1 pcs |
SOME INJECTORS AND PUMPS REQUIRED EXTRA EQUIPMENTS AND ACCESSORIES. PLEASE CONTACT US ABOUT YOUR TYPES.
Machine Request Form
RELATED PRODUCTS
