DYL 811 MEC-CAM

DYL811 MEC-CAM direct drive test stand and is principally designed for the calibration of mechanical fuel injection pumps and EUI&EUP  
Mechanical Fuel pumps
12 CYLINDER MEASUREMENT AND 15 HP MOTOR POWER
BOSCH, DELPHI, STANADYNE DENSO ZEXEL

New CAMBOX designed with 5 section original cam;
1.cam VW
2.cam Cummins
3.cam Volvo-Iveco-Scania,
4.cam MB Axor,Atego
5.cam MB Actross,DAF, Mack, Renault

Test plans consist of 5 groups.

  • Bosch PKW (VW-AUDI-SEAT-SKODA)
  • Bosch LKW (MB,DAF,IVECO.SCANIA…)
  • Delphi Volvo group  (FH 12, 2 pin,4 pin)
  • Cummins & CAT &
  • Detroit USA group
    Siemens piezo (BKP)


**Please check the OPTIONAL tab below to see additional auxiliary tools for other models.

DYL 811 MEC-CAM - Diesel Mechanic Systems

With fast assambly and easy adjustment also user friendly program enables tests and determinations to be achieved very quickly.

Robust compact design with all steel frame construction
Display of pump output and test stand operating data via 15.6 “ PC.

Independently driven two supply pumps( 0-10 bar and 0-40 bar)
Perfect test oil heating and cooling ssytem with tank level control

It contains test plans of most pump types in the market. 
Software updates and test plans can be loaded with remote desktop free of charge.  
Flow and Temp. Measurement of oil return of distributing pump with digital german flowmeters

MECHANICAL PUMP TESTING
Testing of the electromagnetic valve of distributor pump.(12V/24V)
Measurement of the internal pressure of distributor pump.

Dual scale graduates 12 pcs 0-45cc and12 pcs 0-150cc capacity of measuring range
Checking the travel of stroke (optional)

EUI AND EUP TESTING
Actuator valve measurement via BIP sensor and delay time(response time) measurements with follow oscillascope.
Easy and oil free change of cam with a special designed sliding plate.

Perfect angle reseting with 360 pulse encoder for each cam shafts. 
Dynamic electronic mass measurement for quantity

You can check the unit injectors such as Cummins, Caterpillar, Detroit, Delphi Euro 6 and Scania HPI (optional)

Supply voltageAC 380 (3P+N+GND)
Motor Power15 Hp (optional 22 Hp)
Low Pressure (1)0,5 – 8 bar
Low Pressure (2)4 – 40 bar
RPM0-4000 rpm adjustable
Inj Weight Sensor Range0.1 – 500 cc /min
Back Flow Sensor Range1-300 L/h
Dimensions (L x H x W)1800x1750x750(+200) mm
Weight850 Kg
Oil Tank Capacity/Type20 lt (ISO 4113)
Power Output (duration)8 Kw



1.02.04.029Clamping Flange stand1 pcs
4.02.05.033Test Nozzle and Holder Assembly NR:0006 pcs
4.02.05.033Test Nozzle and Holder Assembly NR:0096 pcs
1.01.05.016Coupling Half Cone 17 mm1 pcs
1.01.05.046Coupling Half Cone 19 mm1 pcs
1.01.05.018Coupling Half Cone 22 mm1 pcs
1.01.05.019Coupling Half Cone 25 mm1 pcs
1.01.05.015Coupling Half Cone 30 mm1 pcs
1.01.05.020Coupling Half Cone 35 mm1 pcs
3.02.15.152Bench Stand Flat Type 1 H712pcs
3.02.15.151Bench Stand Flat Type 2 H802pcs
3.02.15.153Bench Stand Flat Type 3 H882pcs
3.02.15.155Bench Stand Radius Type 1 H 902pcs
3.02.15.157Bench Stand Radius Type 2 H 932pcs
3.02.15.156Bench Stand Radius Type 3 H 972pcs
3.02.15.011Clamping Flange 46 mm1 pcs
3.02.15.012Clamping Flange 50 mm1 pcs
3.02.15.013Clamping Flange 68 mm1 pcs
3.02.15.014Clamping Flange 85 mm1 pcs
3.02.15.015Clamping Flange 100 mm1 pcs
01.01.05.63Reduction Ring 461 pcs
01.01.05.48Reduction Ring 501 pcs
01.01.05.55Reduction Ring 681 pcs
01.01.05.61Reduction Ring 851 pcs
4.02.13.024Test Pressure Line M12X14 600 mm6 pcs
4.02.13.027Test Pressure Line M14X14 600 mm6 pcs
4.02.13.025Test Pressure Line M12X14 850 mm6 pcs
4.02.14.013Measuring Glasses 45 ml12 pcs
4.02.14.009Measuring Glasses 150 ml12 pcs
 12/24 Volt Selenoid Cable set1 pcs
1.01.05.075Coupling Dissamble Spanner1 pcs
1.01.05.047Oil Pump connection and Ring joint (12/14/16/18)1 set
4.02.16.089Inlet and Outlet hoses 100 cm1 Set
 Pump Inlet and Outlet Hoses 20 cm(12pcs)1 set

 CAMBOX 125 (5 CAM)1 pcs
3.02.15.048Cam shaft pusher 1st cam1 pcs
3.02.15.050Cam shaft pusher 2nd cam1 pcs
3.02.15.051Cam shaft pusher 3th cam1 pcs
3.02.15.052Cam shaft pusher 4th cam1 pcs
3.02.15.053Cam shaft pusher 5th cam1 pcs
1.02.02.033Bosch VW PDE 1 Type Inj. Test Adaptor1 pcs
1.02.02.031Siemens&Bosch VW PDE2 Type Inj. Test Adaptor1 pcs
1.02.02.018Delphi EUI E1/E3 Inj. Test Adaptor1 pcs
1.02.02.029Bosch EUI Scania Type Inj Test Adaptor1 pcs
1.02.02.017Bosch EUI Iveco 8-10 Type Inj Test Adaptor1 pcs
1.02.02.018Bosch EUP Actross Type Pump Test Adaptor1 pcs
1.02.02.019Bosch EUP Axor/Atego Type Pump Test Adaptor1 pcs
1.02.02.025Cummins Celectt EUI Type Inj Test Adaptor1 pcs
1.02.02.026Bosch/Delphi EUP Daf Pump Test Adaptor1 pcs
1.02.02.017Bosch/DelphiEUI Iveco/Volvo Type Inj Test Adaptor1 pcs
1.01.11.020Selenoid Inj&pump Main Test Cable1 pcs
1.01.11.021Piezo Inj Main Test Cable1pcs
1.01.11.009Delphi 2 Pin Inj Test Cable1 pcs
1.01.11.010Delphi 4 Pin Inj Test Cable1 pcs
1.01.11.022Bosch EUI PKW Inj. Test Cable1 pcs
1.01.11.023Bosch EUP LKW pump test cable1 pcs
1.01.11.004LKW Type Inj. Cable1 pcs
1.01.11.009Universal Inj Test Cable1 pcs
 Inj – Pump Connection Screw Set (12 pcs)1 set
 Injector and Pump Spacer Set (6 pcs)1 set
4.02.05.026Test Injector for LKW Pumps1 pcs
3.02.15.054Dummy Fixture for calibration1 pcs
4.02.13.027Pipe 6×2 mm 600 mm 14X141 pcs
3.02.13.07914 mm T type screw and 14 mm nut2 set
4.02.12.148Installation USB Flash disk1 pcs
4.02.12.191Keyboard and Mause set (Wireless)1 pcs

BAZI ENJEKTÖR VE POMPALAR ESKTRA EKİPMAN VE APARATA İHTİYAÇ DUYMAKTADIR. ENJEKTÖR VE POMPA TÜRÜNÜZ İÇİN LÜTFEN İLETİŞİME GEÇİNİZ.

RELATED PRODUCTS

birim enjektör test tezgahı
UNIT PC EG
DYL 811 CLASSIC
UNIT S PC CAMBOX