DYL 811 CAMBOX
Premium, Exact and fast EUI&EUP TESTING with traditional DYL811 cabinet
Performing complete and accurate test of multi-brand EUI&EUP injectors and Pumps
New CAMBOX designed with 5 section original cam;
1.cam VW
2.cam Cummins
3.cam Volvo-Iveco-Scania,
4.cam MB Axor,Atego
5.cam MB Actross,DAF, Mack, Renault
Test plans consist of 5 groups.
- Bosch PKW (VW-AUDI-SEAT-SKODA)
- Bosch LKW (MB,DAF,IVECO.SCANIA…)
- Delphi Volvo group (FH 12, 2 pin,4 pin)
- Cummins & CAT & Detroit USA group
- Siemens piezo (BKP)
** It is not possible to test Mechanical type fuel pumps on this model.
**Please check the OPTIONAL tab below to see additional auxiliary tools for other models.
DYL 811 CAMBOX
With fast assambly and easy adjustment also user friendly program enables tests and determinations to be achieved very quickly
Actuator valve measurement via BIP sensor and delay time(response time) measurements with follow oscillascope.
Easy and oil free change of cam with a special designed sliding plate.
Perfect angle reseting with 360 pulse encoder for each cam shafts.
Dynamic electronic mass measurement for quantity
You can check the unit injectors such as Cummins, Caterpillar, Detroit, Delphi Euro 6 and Scania HPI (optional)
It contains test plans of most injector and pump types in the market.
Robust compact design with all steel frame construction
Perfect test oil heating and cooling ssytem with tank level control
Software updates and test plans can be loaded with remote desktop free of charge.
Supply voltage | AC 380 (3P+N+GND) |
Motor Power | 15 Hp |
Low Pressure (1) | 0,5 – 8 bar |
RPM | 0-2000 rpm adjustable |
Inj Weight Sensor Range | 0.1 – 500 cc /min |
Back Flow Sensor Range | 1-300 L/h |
Dimensions (L x H x W) | 1800x1750x750(+200) mm |
Weight | 700 Kg |
Oil Tank Capacity/Type | 20 lt (ISO 4113) |
Power Output (duration) | 8 Kw |
Code | Description | Pieces |
CAMBOX 125 (5 CAM) | 1 pcs | |
3.02.15.048 | Cam shaft pusher 1st cam | 1 pcs |
3.02.15.050 | Cam shaft pusher 2nd cam | 1 pcs |
3.02.15.051 | Cam shaft pusher 3th cam | 1 pcs |
3.02.15.052 | Cam shaft pusher 4th cam | 1 pcs |
3.02.15.053 | Cam shaft pusher 5th cam | 1 pcs |
1.02.02.033 | Bosch PDE 1 Type Inj. Test Adaptor | 1 pcs |
1.02.02.031 | Siemens&Bosch VW PDE2 Type Inj. Test Adaptor | 1 pcs |
1.02.02.018 | Delphi EUI E1/E3 Inj. Test Adaptor | 1 pcs |
1.02.02.029 | Bosch EUI Scania Type Inj Test Adaptor | 1 pcs |
1.02.02.017 | Bosch EUI Iveco 8-10 Type Inj Test Adaptor | 1 pcs |
1.02.02.018 | Bosch EUP Actross Type Pump Test Adaptor | 1 pcs |
1.02.02.019 | Bosch EUP Axor/Atego Type Pump Test Adaptor | 1 pcs |
1.02.02.025 | Cummins Celectt EUI Type Inj Test Adaptor | 1 pcs |
1.02.02.026 | Bosch/Delphi EUP Daf Pump Test Adaptor | 1 pcs |
1.02.02.017 | Bosch/DelphiEUI Iveco/Volvo Type Inj Test Adaptor | 1 pcs |
1.01.11.020 | Selenoid Inj&pump Main Test Cable | 1 pcs |
1.01.11.021 | Piezo Inj Main Test Cable | 1pcs |
1.01.11.009 | Delphi 2 Pin Inj Test Cable | 1 pcs |
1.01.11.010 | Delphi 4 Pin Inj Test Cable | 1 pcs |
1.01.11.022 | Bosch EUI PKW Inj. Test Cable | 1 pcs |
1.01.11.023 | Bosch EUP LKW pump test cable | 1 pcs |
1.01.11.004 | LKW Type Inj. Cable | 1 pcs |
1.01.11.009 | Universal Inj Test Cable | 1 pcs |
Inj – Pump Connection Screw Set (12 pcs) | 1 set | |
Injector and Pump Spacer Set (6 pcs) | 1 set | |
4.02.05.026 | Test Injector for LKW Pumps | 1 pcs |
4.02.13.027 | Pipe 6×2 mm 600 mm 14X14 | 1 pcs |
4.02.16.089 | Inlet and Outlet hoses | 1 Set |
3.02.15.054 | Dummy Fixture for calibration | 1 pcs |
4.02.12.148 | Installation USB Flash disk | 1 pcs |
SOME INJECTORS AND PUMPS REQUIRED EXTRA EQUIPMENTS AND ACCESSORIES. PLEASE CONTACT US ABOUT YOUR TYPES.